| *Frequency response is from -3dB @ 55 Hz to well beyond 24,000 Hz.
*Efficiency is 87dB.
*Impedance is 8 Ohms, nominal. Minimum impedance is 6.3 Ohms.
*Tweeter: One 1" cloth dome with a large-diameter vent on its pole piece and a big aperiodic damping chamber which imitates an infinite baffle loading. The tweeter is manufactured on a special production line under laboratory conditions.
*Mid-bass, bass: Two 6" polypropylene, double-magnet drivers, each with a 3" voice coil diameter. Extremely rigid structural physics and the piston-like action of these drivers produce exceptionally quick transients and a complete absence of coloration. These drivers are run full-range and placed in a single vented box loading.
*Internal wiring is manufactured by Transparent Audio.
*Single Cardas rhodium binding posts.
*The crossover for the tweeter is hard wired. We utilize Hovland MusiCaps and Vishay resistors.
*Damping material or stuffing is Acousta-Stuff, a nylon polymide loose bulk fiber that is tri-lobal (instead of round) and multi-directionally crimped so that the strands interlock to form a very cohesive mass that does not require support and will not settle.
*The grills are made of an extremely transparent material which is stretched over a thin steel frame. They attach via magnets which are buried under the surface laminate, allowing the speakers to look as finished with the grills on as with them off.
*Black Italian granite is utilized.
*The footprint is 9 1/2" X 15 3/4"; the height is 20 1/2".
*Net weight, per loudspeaker, is 70 pounds. |