| *Frequency response is from -3dB @ 27 Hz to well beyond 24,000 Hz.
*Efficiency is 88dB.
*Impedance is 8 Ohms, nominal. Minimum impedance is 6.3 Ohms.
*Tweeter: One 1" cloth dome with a large-diameter vent on its pole piece and a big aperiodic damping chamber which imitates an infinite baffle loading. The tweeter is manufactured on a special production line under laboratory conditions.
*Mid-bass: Two 6" polypropylene, double-magnet drivers, each with a 3" voice coil diameter. Extremely rigid structural physics and the piston-like action of these drivers produce exceptionally quick transients and a complete absence of coloration. The very short transmission line lengths are the result of specific stuffing densities derived from the slowing effect of damping material on the speed of lower-frequency sound waves.
*Bass: One 8 " woofers in a dual-ported vented enclosure.
*The use of Single Cardas rhodium binding posts simplifies full optimization of the speaker.
*Damping material or stuffing is Acousta-Stuff, a nylon polymide loose bulk fiber that is tri-lobal (instead of round) and multi-directionally crimped so that the strands interlock to form a very cohesive mass that does not require support and will not settle.
*The grills are made of an extremely transparent material which is stretched over a thin steel frame. They attach via magnets which are buried under the surface laminate, allowing the speakers to look as finished with the grills on as with them off.
*The footprint is 11" x 16" x 44"H
*Net weight, per loudspeaker, is 125 lbs.
*The warranty is 6 years on parts and labor. |
