-Frequency response is from -3dB @ 60 Hz to well beyond 24,000 Hz.
-Efficiency is 87dB.
-Impedance is 8 Ohms, nominal. Minimum impedance is 6.3 Ohms.
-Tweeter: One 1" cloth dome with a large-diameter vent on its pole piece and a big aperiodic damping chamber that imitates an infinite baffle loading. The tweeter is manufactured on a special production line under laboratory conditions.
-Mid-bass: bass: One 6" polypropylene, double-magnet driver, with a 3" voice coil diameter. Extremely rigid structural physics and the piston-like action of this driver produce exceptionally quick transients and a complete absence of coloration. This driver is run full-range and loaded in a single vented box.
-Internal wiring is manufactured by Transparent Audio.
-Single Cardas rhodium binding posts.
-The crossover for the tweeter is hard wired. We utilize Hovland MusiCaps and Vishay resistors.
-Damping material or stuffing is Acousta-Stuff, a nylon polyamide loose bulk fiber that is tri-lobal (instead of round) and multi-directionally crimped so that the strands interlock to form a very cohesive mass that does not require support and will not settle.
-The grills are made of an extremely transparent material that is stretched over a thin steel frame. They attach via magnets that are buried under the surface laminate, allowing the speakers to look as finished with the grills on as with them off.
-Black Italian granite is utilized.
-The footprint is 9 1/2" x 13". The height is 15"
-Net weight, per loudspeaker, is 55 pounds. |
|